Skip to content
Home » What is a Plumbing Inspection? 

What is a Plumbing Inspection? 

A plumbing inspection is a process that identifies the key areas of a property’s plumbing system. It is done by licensed plumbers to reduce the possibility of pipe corrosion, leaks, clogs, and burst pipes that could cause flooding or property damage. 

Inspection Checklists 

A plumber can use a checklist to inspect the plumbing system on a property. It is used for recording any issues found during the inspection. This checklist includes the following: 

  • Examining pipes, valves, water heaters and drains to check for damage or leaks. 
  • Capture photo evidence and make notes. 
  • Record corrective action. 
  • Provide general recommendations. 

The Importance Plumbing Inspection 

Regular inspections of your plumbing system will help to keep it in good working order and prevent expensive and unplanned repairs. But plumbing inspections should always be performed correctly to meet the following objectives. 

  • Examining pipes, valves, water heaters and drains to check for damage or leaks.
  • Capture photo evidence and make notes.
  • Record corrective action.
  • Provide general recommendations.

The Most Important Things to Remember When Inspecting Plumbing 

The plumbing inspection should inspect all components of the system. This includes pipes, valves as well as water heaters and drains. These components will be inspected for any leaks or corrosion, as well as drainage problems. Here are the essential points for a plumbing inspection. 

  • Shut off the main water supply. Look at the shut-off valve. You should check if the water meter keeps reading, even when the valve is closed. This would enable you to verify whether water leaks are occurring on the property. 
  • Check the plumbing system for leakage. Fill all drainage systems with water until there is no water left. 
  • Conduct water pipe pressure test: Start the water service at 75 psi and increase it to 100. This will allow you to determine the normal working pressure through the water pipes. You can check the water supply to see if it is operating smoothly even when the minimum pressure is met. 
  • Check the drainage and sewer lines: Look at the drainage and sewer lines from your property to the curb connection and septic tank. To check for any corrosion, pipe damage or major blockages, 
  • Look at fixtures, lines, and drains. All fixtures need separate valves to regulate the water supply. Check the property for any signs of water damage. You should inspect the gutter, flexible pipes, and drains for any obstructions that could affect the plumbing. 

What are the Key Features of a Plumbing Inspector? 

To avoid emergency plumbing issues like water bursts and gas leaks or broken water pipes, maintaining a strong plumbing system is crucial. This includes: 

  • Checking your faucets often for damage or leaks. 
  • Make sure that there are no water drips after the spigot has been turned off. 
  • You should check the underside of the sinks to see if there are any water stains or drips that may occur when the water runs. 
  • Avoid clogging your drains, don’t dispose of any rubbish, grease, or medicines. 
  • Visually inspect any visible signs of water staining walls or ceilings. 
  • You must ensure that the water pressure remains at a safe level. 
  • Drain the water heater to get rid of any sediments. 
  • Make sure to check the toilet for loose fittings. 
  • If the hoses are leaking or cracking, this is a sign to replace them. 
  • Avoid using chemical clog elimination products that can cause corrosion in pipes. 
  • Turn off water valves to outdoor spigots. 
  • Make sure to clean the gutters to avoid water blocking. 
  • Inspect your septic tank regularly. 
  • You should be aware of your property’s structure and ensure that you do regular drainage maintenance. 

How do I write a Plumbing Inspection report? 

The task of organizing and managing paper-based plumber reports is time-consuming and too energy-intensive. Traditional pen and paper can be cumbersome. It is difficult to take photos or record information. This can all be avoided by using a digital inspection application.